当前位置 : 首页 > 产品展示
齿形及几何图形

齿形及几何图形

详细说明

             
 

根据不同切割需求,使用不同齿形
Metal cicular Saw Blades Are Ground,According To
Their Application,With Different Kinds Of Tooth Forms
--------------------------------------------------------------------------------------------------------------------------------------------------------

   
Tooth Form “A” And “AW”
For thin Metal Slitting Saw Blades with a tooth Pitch up to approx.3.0mm
Advisable for brass,tooth from “A”is suitable for slotting materials.
All teeth of tooth form  “AW” are bevellde alternatively.
三角齿及三角齿倒角
用于一般铣槽及软金属的切割
左右间隔三分之一倒角

--------------------------------------------------------------------------------------------------------------------------------------------------------

   
Tooth Form “B” And “BW”
Suitable for cutting tubes and porfiles made of steel or non-ferrous
metals.Tooth form “B”is specialized for cutting very thin-walled pipes
And profiles.All teeth form  “BW”are bevellde alternatively.
圆弧齿及圆弧左右齿
用于薄壁金属管类的切割
左右间隔三分之一倒角

--------------------------------------------------------------------------------------------------------------------------------------------------------

   
Tooth  Form HZ
This tooth is also known as form “C”
Teeth are ground according to the roughing and finishing tooth
system.A tooth pair is consisting of one roughing tooth (1/3cutting
Width)and one finishing tooth(2*1/3 cutting width).According to the
triple chip geometry the roughing tooth is approx*0.2-0.3mm highre
Compared with the finishing tooth.Tooth form“HZ”is suitable for
Cutting solid materials.
高低齿
用于厚壁金属管类的切割
隔齿两边三分之一倒角,倒角齿不倒角齿0.2-0.3mm

--------------------------------------------------------------------------------------------------------------------------------------------------------

   
Tooth Form BR
Tooth form BR is a parrot  tooth with chip breaker,This tooth form is
Suitable  for cutting pipes under high performance conditons
Bacause the teeth are side cutting
开槽齿
用于实心金属管类重切割
在三分之一处开槽