齿形及几何图形

详细说明


根据不同切割需求，使用不同齿形 Metal cicular Saw Blades Are Ground,According To Their Application,With Different Kinds Of Tooth Forms --------------------------------------------------------------------------------------------------------------------------------------------------------
Tooth Form “A” And “AW” For thin Metal Slitting Saw Blades with a tooth Pitch up to approx.3.0mm Advisable for brass,tooth from “A”is suitable for slotting materials. All teeth of tooth form “AW” are bevellde alternatively. 三角齿及三角齿倒角用于一般铣槽及软金属的切割左右间隔三分之一倒角
--------------------------------------------------------------------------------------------------------------------------------------------------------
Tooth Form “B” And “BW” Suitable for cutting tubes and porfiles made of steel or non-ferrous metals.Tooth form “B”is specialized for cutting very thin-walled pipes And profiles.All teeth form “BW”are bevellde alternatively. 圆弧齿及圆弧左右齿用于薄壁金属管类的切割左右间隔三分之一倒角
--------------------------------------------------------------------------------------------------------------------------------------------------------
Tooth Form HZ This tooth is also known as form “C” Teeth are ground according to the roughing and finishing tooth system.A tooth pair is consisting of one roughing tooth (1/3cutting Width)and one finishing tooth(21/3 cutting width).According to the triple chip geometry the roughing tooth is approx0.2-0.3mm highre Compared with the finishing tooth.Tooth form“HZ”is suitable for Cutting solid materials. 高低齿用于厚壁金属管类的切割隔齿两边三分之一倒角，倒角齿不倒角齿0.2-0.3mm
--------------------------------------------------------------------------------------------------------------------------------------------------------
Tooth Form BR Tooth form BR is a parrot tooth with chip breaker,This tooth form is Suitable for cutting pipes under high performance conditons Bacause the teeth are side cutting 开槽齿用于实心金属管类重切割在三分之一处开槽

上一条: 常见锯片遇到的问题及解决方案